贺永，2017年度“长江学者奖励计划”青年学者。国家优秀青年科学基金获得者，浙江省三维打印工艺与装备重点实验室副主任。

一直以来从事生物制造、生物3D打印、数控装备等方面的研究工作，主持国家自然科学基金3项，国家支撑计划子课题、国家数控重大专项子课题各一项，省部级课题多项，授权发明专利40余项，发表SCI论文30余篇，篇均影响因子3.0，论文发表在包括Biomaterials,Biofabrication等生物制造、微制造、微流体领域的顶级期刊。

本团队目前聚焦于原创性的生物打印工艺及生物3D打印机、生物墨水全自动生产线、器官功能化诱导装备、生物打印器官芯片、可植入式药物缓释泵等医疗器械装备研究及开发过程中所涉及的成型工艺、成型机理、装备开发。目前课题组的生物3D打印机、微流控芯片3D打印机已进入产业化阶段。与医学、材料、化学、力学、药学相关老师建立了良好的合作关系，欢迎与相关领域感兴趣的老师合作研究。

2016.12- 教授，博士生导师

2017.1- 国家优秀青年基金获得者，浙江省杰青

2010.12-2016.12浙江大学，制造工程及自动化研究所，副教授

2010.03-2010.11 浙江大学，现代制造工程研究所，讲师

2008.04-2010.03 浙江大学，力学博士后流动站，博士后

2001.09-2007.12 浙江大学，机械制造及其自动化，博士

1997.09-2001.07 中国矿业大学，工程力学，学士

1、生物3D打印及器官3D打印

2、器官芯片的生物3D打印

3、柔性电子3D打印

* Corresponding author

40. Liu Y, Gao Q, Du S, He Y*. Fabrication of cerebral aneurysm simulator with a desktop 3D printer[J]. Scientific Reports, 2017.

39. Gao Q, Liu Z, He Y*. 3D Bioprinting of Vessel-like Structures with Multi-level Fluidic Channels[J]. ACS Biomaterials Science \u0026 Engineering, 2017.

38. Yao X H, Jia T, Xie C Q, et al. Facial fabrication of paper-based flexible 电子学 with flash foam stamp lithography[J]. Microsystem Technologies, 2016: 1-8.

37. Sun M, Liu A, Shao H, He Y*, et al. Systematical Evaluation of Mechanically Strong 3D Printed Diluted 镁 Doping 硅灰石 Scaffolds on Osteogenic Capacity in Rabbit Calvarial Defects[J]. Scientific Reports, 2016, 34029.

36. He Y*, Yang F, Zhao H, et al. Research on the printability of hydrogels in 3D bioprinting.[J]. Scientific Reports, 2016, 29977.

35. He Y*, Gao Q, Wu W, et al. 3D Printed Paper-Based Microfluidic Analytical Devices[J]. Micromachines, 2016, 7(7), 108.

34. Liu A, Sun M, Shao H, He Y*, et al. The outstanding mechanical response and bone regeneration capacity of robocast dilute 镁doped wollastonite scaffolds in critical size bone defects[J]. Journal of Materials 化学 B, 2016, 4(22): 3945-3958.

33. He Y*, Wu Y, Fu J, et al. Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review[J]. Electroanalysis, 2016, 28, 1658 – 1678.

32. Liu A, Xue G, Sun M,.. He Y*. 3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction[J]. Scientific reports, 2016, 6: 21704.

31. Jin Y, Li H, He Y*, et al. Quantitative analysis of surface profile in fused deposition modeling[J]. Additive Manufacturing, 2015, DOI: 10.1016/j.addma.2015.10.001

30. Gao Q, He Y*, Fu J, et al. Fabrication of shape controllable alginate microparticles based on drop-on-demand jetting[J]. Journal of Sol-Gel Science and Technology, 2015: DOI: 10.1007/s10971-015-3890-2.

29. Xie K, Zhang L, Yang X, et al. Preparation and Characterization of Low 温度 Heat-Treated 45S5 Bioactive Glass-Ceramic Analogues[J]. Biomedical glasses, 2015, 1, 80-92.

28. Xie J, Yang X, Shao H, He Y, et al. Simultaneous mechanical property and biodegradation improvement of 硅灰石 bioceramic through 镁 dilute doping[J]. Journal of the mechanical behavior of biomedical materials, 2016, 54: 60-71.

27. Yong He, Yan Wu, Fu Jian-zhong* et al. Fabrication of Paper-Based Microfluidic Analysis Devices: a Review[J]. RSC Advances, 2015, 5(4), 78109-78127 (IF=3.84)

26. Huifeng Shao, Xianyan Yang, Yong He* et al. Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior[J]. Biofabrication, 2015, 7(3):035010. (IF=4.289)

25. He Y, Xiao X, Wu Y, et al. A facile and low-cost micro fabrication material: flash foam[J]. Scientific Reports, 2015, 5. 13522. (IF=5.578)

24. Wang Q, Xia Q, Wu Y. Yong He, et al. 3D‐Printed Atsttrin‐Incorporated Alginate/Hydroxyapatite Scaffold Promotes Bone Defect Regeneration with TNF/TNFR Signaling Involvement[J]. Advanced healthcare materials, 2015. 4(11): 1701-1708. (IF=5.797)

23. Xu S, Chen X, Yang X*, Zhang L, Yang G, Shao H, He Y, Gou Z. Preparation and in vitro biological evaluation of octacalcium 磷酸盐/bioactive glass-chitosan/alginate composite membranes potential for bone guided regeneration. Journal of Nanoscience and Nanotechnology, 2015; 15: 1-9. (IF=1.556)

22. Qing Gao, Yong He*, Jian-zhong Fu, An Liu, Liang Ma. Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery[J]. Biomaterials, 2015, 61, 203-215. (IF=8.557)

21. Yu-an Jin, Yong He*, Jian-zhong Fu. Support generation for additive manufacturing based on sliced data[J].The International Journal of Advanced Manufacturing Technology, 2015, 80(9), 2041-2052 (IF=1.458)

20. Yong He, WenBin Wu, Ting Zhang, JianZhong Fu. Micro structure fabrication with a simplified hot embossing method [J]. Rsc Advances, 2015, 5(49),39138-39144. (IF=3.84)

19. Yong He, JingJiang Qiu, JianZhong Fu, Jiong Zhang, YiNa Ren, An Liu. Printing 3D microfluidic chip with a sugar 3D printer [J]. Microfluidics and Nanofluidics, 2015, 19, 447-456. (IF=2.528)

18. Yong He, WenBing Wu, JianZhong Fu. Rapid fabrication of paper-based microfluidic analytical devices with desktop stereolithography 3D printer [J]. RSC Advances, 2015, 5(4), 2694-2701. (IF=3.84)

17. Yong He, Guang-huai Xue, Jian-zhong Fu, Fabrication of low cost soft tissue prostheses with the desktop 3D printer [J]. Scientific Reports, 2014, 4, 6973. (IF=5.578)

16. Yong He, Yan Wu, Xiao Xiao, JianZhong Fu, GuangHuai Xue. A low-cost and rapid microfluidic paper-based analytical devices fabrication method: Flash Foam Stamp Lithography [J]. RSC Advances, 2014, 4(109): 63860-63865. (IF=3.84)

15. Jin Y, He Y*, Xue G, et al. A parallel-based path generation method for fused deposition modeling [J]. The International Journal of Advanced Manufacturing Technology, 2015, 77(5): 927-937. (IF=1.458)

14. Xu S, Yang X, Chen X, Shao H, He Y et al. Effect of borosilicate glass on the mechanical and biodegradation properties of 45S5-derived bioactive glass-ceramics [J]. Journal of Non-Crystalline Solids, 2014, 405: 91-99. (IF=1.766)

13. Jin Y, He Y*, Fu J, et al. Optimization of tool-path generation for material extrusion-based additive manufacturing technology [J]. Additive Manufacturing, 2014, 1(1), 32-47.

12. Jin Y, He Y*, Gao Q, et al. Droplet deviation modeling and compensation scheme of inkjet printing [J]. The International Journal of Advanced Manufacturing Technology, 2014, 75(9): 1405-1415. (IF=1.458)

11. Yu-an Jin, Yong He*, Jian-zhong Fu, Zhi-wei Lin, Wen-feng Gan. A fine-interpolation-based parametric interpolation method with a novel real-时间 lookahead algorithm [J]. Computer-Aided 设计, 2014,55: 37-48. (IF=1.801)

10. Peng Zhao, Huamin Zhou, Yong He, Kan Cai, Jianzhong Fu. A nondestructiv e online method for monitoring the injection molding process by collecting and analyzing machine running data [J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(5-8): 765-777 (IF=1.458)

9. Jin Y, He Y*, Fu J. A look-ahead and adaptive speed control algorithm for parametric interpolation [J]. The International Journal of Advanced Manufacturing Technology, 2013, 69(9-12): 2613-2620. (IF=1.458)

8. Jin Y, He Y*, Fu J, et al. An interpolation method for the open CNC system based on EPM [J]. The International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 405-416. (IF=1.458)

7. He Y, Fu J Z, Zhao P, et al. Enhanced polymer filling and uniform shrinkage of polymer and mold in a hot embossing process [J]. Polymer Engineering \u0026 Science, 2013, 53(6): 1314-1320. (IF=1.52)

6. Lin Z, Fu J, He Y, et al. A robust 2D point-sequence curve offset algorithm with multiple islands for contour-parallel tool path [J]. Computer-Aided 设计, 2013, 45(3): 657-670. (IF=1.801)

5. Shen H, Fu J, He Y, et al. On-line asynchronous compensation methods for static/quasi-static error implemented on CNC machine tools [J]. International Journal of Machine Tools and Manufacture, 2012, 60: 14-26. (IF=3.037)

4. He Y, Fu J Z, Chen Z C. Analysis of pattern height development in hot embossing process [J]. Microsystem technologies, 2009, 15(7): 963-968. (IF=0.875)

3. Yong He, Jianzhong F, Zichen C. Experimental study on the hot embossing polymer microfluidic chip [J]. Chinese Journal of Mechanical Engineering, 2008, 21(3): 87-89. (IF=0.598)

2. He Y, Fu J Z, Chen Z C. Optimization of control parameters in micro hot embossing [J]. Microsystem Technologies, 2008, 14(3): 325-329. (IF=0.875)

1. He Y, Fu J Z, Chen Z C. Research on optimization of the hot embossing process [J]. Journal of Micromechanics and Microengineering, 2007, 17(12): 2420. (IF=1.731)

1.MOOC课程“3D打印：从原理到创新应用”入选双一流高校专业课程TOP100，2020；

2.MOOC课程“3D打印：从原理到创新应用”入选浙江省优秀研究生课程，2019；

3.作为指导教师指导学生获得机械行业卓越工程师教育联盟第二届“恒星杯”毕业设计大赛铜奖，2018；

4.作为指导教师指导学生获得杰瑞杯第四届中国研究生石油装备创新设计大赛一等奖，2017；

5.作为指导教师指导学生华为杯第十二届中国研究生电子设计竞赛华东区一等奖，2017;

6.荣获浙江大学机械工程学院2014-2015学年“我最喜爱的老师”称号；

7.作为指导教师指导学生获得浙江省第十四届挑战杯特等奖，2015；

8.作为指导教师指导学生获得首届浙江省“互联网+”大学生创新创业大赛暨首届中国“互联网+大学生创新创业大赛选拔赛”金奖，2015；

9.第六届浙江大学柯元恒实验奖教金，一等奖，2014;

10.荣获浙江大学学年优秀研究生德育导师称号。